The out-come / appearance of the frills of sealing sample is not ccceptable, it looks very flat / dead, must be more balanced / natural look as standard sample DD 28.8.02.
Sort out the major material defects.
Take care for trimming + cleaning.
Stringholes from plastic string ( for washing ) at pocket flap visible, must be removed.
Front horizontal seam not leveled.
Handfeel slightly softer than approved sample.
Armhole pipping ( inside) 2mm more than sealing sample.
Pls. add one more button for bigger sizes.
Make sure inner facing is long enough in order to avoid pulling at placket bottom.
Pay attn. the workmanship of ironing, don’t press the seam too much and avoid the seam allowance see through by heavy pressing.
Center front collar not overlap but also not spray.
Bust dart seam allowance must be ironed upward.
Uneven width of top-stitches at closure edge.
Pls. add one more button for all sizes as the distance from hem is too big.
Pls. fix pocket with movable stitches as sealing sample.
The collar band must not visible at back when wear.
Pls. make sure the collar are balanced on both sides.
Found 3 colors shade within 10 pcs!!
3 different color lots in color beige compare to the approved swatch: 3/10 pcs darker, 4/10 pcs lighter, 3/10 as swatch.
Pay attention on the color, which within one garment must be in same color shade.
Due to the price reason, we accept this order with cutting both ways either in direction or against hair C but you have to make sure the fabric direction must be always same with one garment.
Pls. cut all jackets against hair.
Pls. close the pocket with several movable stitches ( must be not closed all, pls. leave 1cm at each side unstitching).